BACKGROUND
It is a red-ox titration. Ceric ammonium sulphate solution is titrated with arsenic trioxide (primary standard) in presence of sulfuric and osmic acid utilizing the ferroin sulphate as indicator. End point is visually detected by change in color from pink to very pale blue.1
Telegram | Subscribe |
Follow | |
Website | Click here |
REQUIREMENTS
Chemicals:
Ceric ammonium sulphate
Sulfuric acid
Sodium hydroxide
Osmic acid
Ferrous sulfate
1,10-phenanthroline hydrochloride
Ferroin sulfate
Apparatus:
Beakers
Volumetric flask
Conical flask
Burette
Pipette
PROCEDURE
Preparation of Ceric Ammonium Sulphate
Dissolve around 65 g of ceric ammonium sulphate in a mixture of 30 ml of sulfuric acid and 500 ml of water, with gentle heating. Filter after cooling the solution and dilute up to 1000 ml with water.
Preparation of Sodium hydroxide solutio
Weigh around 8 g of sodium hydroxide accurately and dilute up to 100 ml with distilled water.
Preparation of Sulfuric acid
Dilute 57 ml of sulfuric acid up to 1000 ml with distilled water.
Osmic acid solution
Dissolve 1 g of osmic acid was dissolved in 100 ml of distilled water.
Ferroin Sulphate Solution
Transfer 0.7 g of ferrous sulfate and 1,10-phenanthroline hydrochloride in to a 100 ml volumetric flask containing 70 ml distilled water, shaken and finally diluted to 100 ml.
Standardization of Ceric Ammonium Sulfate
Transfer 0.2 g of arsenic trioxide dried at 105°C for 1 h into a 500 ml conical flask. Rinse the inner wall of the flask with 25 ml of 8% w/v sodium hydroxide solution.
Swirl and dissolve the contents in 100 ml water. Add 30 ml of dilute sulfuric acid, 0.15 ml of osmic acid solution, 0.1 ml of ferroin sulfate. Titrate with ceric ammonium sulfate solution until pink color changed to pale blue color. Each ml of 0.1 M ceric ammonium sulfate = 0.004946g of As2O3.
Tabulation for standardization
Sl.No. | Weight of As2O3 taken (gm) | Burette Reading of ceric ammonium sulfate (ml) | Volume of ceric ammonium sulfate consumed(ml) | |
IR | FR | |||
1 | ||||
2 | ||||
3 |
CONCLUSION
From the above experiment it is evident that ceric ammonium sulfate can be effectively standardized by using primary standard arsenic trioxide. After performing the calculations, strength of the prepared ceric ammonium sulfate solution was found to be……..M.
REFERENCES
1. Indian Pharmacopoeia, Volume I, The Indian Pharmacopoeia Commission, Ghaziabad;2010:623.
Also read:
- Preparation and standardization of sodium hydroxide
- Preparation and standardization of potassium permanganate
- Preparation & Standardisation of Ceric Ammonium Sulphate
- Determination of saponification value of fat (coconut oil)
- Protein denaturation by egg albumin method (in vitro)
- Analgesic activity study of drugs by hot plate (Eddy’s hot plate) method
- Study of local anesthetics by Infiltration anaesthesia in guinea pig
- Study of local anesthetics by Surface anaesthesia on the cornea of rabbits
- Study of local anesthetics by Spinal anaesthesia in rats
🔴 Would you like to attempt Labmonk Daily quiz? Click here
🔵 Check out Jobs & Exam Notices. Labmonk Notice Board
🔴 Labmonk Scholarships. Click here
🔵 Labmonk Blog. Click here
🔴 Do you need notes? Click here
Watch Career related videos on Youtube: Watch now !!